Product Details:
Payment & Shipping Terms:
|
Controller: | KM-5166 LCD Touch Screen Controller | Temperature Range: | -40 ~ 150 ℃ |
---|---|---|---|
System: | Balanced And Humidity Control System | Interior Material: | Stainless Steel Plate(SUS304) |
Exterior Material: | Baked Painting Steel Or Stainless Steel(SUS304) | Setting Mode: | Touch Mode Input |
High Light: | climatic test chambers,Environmental Test Chamber |
150L High temperature and constant heat climatic test chamber temperature humidity chamber
Product Overview
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat
Prouduct Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research
institution, inspection and quarantine bureau, university etc..
Prouduct Specifications
Chamber | |||
Workspace volume | IW 600× IH 600 × ID 460 mm | ||
Exterior size | IW 880× IH 1730× ID 1400mm | ||
Temperature | |||
Temperature range | -40 ~ 150 ℃ | ||
Temp Deviation | ±2.0℃ | ||
Temp Constancy | ±0.5℃ | ||
Temp Uniformity | ±0.5℃ | ||
Ramping and soaking rate |
-40℃ ↓ +100℃ within 45 min(no-load) +20℃ ↑ -40℃ within 60 min(no-load) |
||
Humidity | |||
Humidity range | 20%R.H.~98%R.H | ||
Control range |
|
||
Humidity deviation | ±2%RH | ||
Humidity uniformity | 3.0%RH | ||
Humidity deviation | ±2.0%RH | ||
Chamber Structure | |||
Overall structure and chamber was composed of three parts as below. Insulation box, separate refrigeration units, and electrical control cabinet. |
|||
Insulation box |
※ wall material: high-quality carbon steel with static color spray ※ inner wall material: SUS304 # matte stainless steel plate ※ Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
||
Door | Heating wire was installed at the door frames to prevent condensation at low temperatures. | ||
Observation window | With 2 sets 350 × 500mm (width × height) observation window, multi-hollow electric insulation coated glass prevent condensation effectively | ||
Cable port | Φ50mm*2 located on both sides(each*1) with rubber stopper and plastic cover | ||
Lighting device | 11W/AC220V *1 located on observation window | ||
Water outlet hole | Available for drain the condensate water | ||
Sample holder | Two layers of stainless steel sample holder. | ||
Mobile Casters | Mobile Casters *4 with foot cups | ||
Electric control box | Total power circuit breaker, over-temperature protection. | ||
Water supply system | Water pump automatic supply |
Curve recording function | Pt100 |
Controller |
KOMEG brand KM-5166 LCD Touch screen controller with PID control parameters setting |
Display |
Temperature and humidity settings (SV) Actual (PV) value can be displayed directly, Execution of the program can display numbers, Paragraphs, remaining time and cycles, running time display, Program editing and graphic curve display, Fixed or program operation status display, 7-inch TFT display screen. |
Resolution | Temperature: + 0.01 ℃; Humidity: + 0.1%; Time: 1min |
Setting range | Temperature can be adjusted based on the working temp of the equipment(the upper limit +5 ℃, the lower limit -5 ℃) |
Running mode | programmable running ,constant running and booking boot |
Setting mode | Touch mode input |
Communication interface |
Data collection when connected to a computer Can be used as monitoring and remote control system, Multiple machines synchronization control available. |
U disk Memory card | 1G-8G available |
Data collection | RAM with battery protection settings, data can be saved, maximum historical data memory storage is 90 days (when the sampling time is 1min) |
Power off memory | Power recovery mode can be set as hot start, cold start and stop. |
Pre-set function | boot time can be set freely and machine runs automatically when turning on power |
Software environment | Windows2000 or Windows XP |
Network Connection | Can be connected to Ethernet, remote control function, data collection, can simultaneously control multiple machines. |
Date and Time | Fault alarm and causes handling prompts, power protection, the lower limit temperature protection, timer function (automatic start and automatic stop running), self-diagnostic function. |
Environmental test chamber Standard
GJB150.3 high-temperature testing
GJB150.4 low-temperature testing
GJB150.9 humid testing
GB11158 Technical conditions for high-temperature testing box
GB10589-89 Technical conditions for low-temperature testing box
GB10592-89 Technical conditions for high and low temperature testing box
B/T10586-89 technical conditions for humidity testing chamber
GB/T2423.1-2001 Low-temperature testing methods
GB/T2423.2-2001 High-temperature testing methods
B/T2423.3-93 Testing Method for humidity Test Chamber
GB/T2423.4-93 Alternating hot and humid testing method
GB/T2423.22-2001temperature testing method
IEC60068-2-1.1990 low-temperature testing method
IEC60068-2-2.1974 high-temperature testing method
Prouduct Display
Packing and Shipment:
For more detail information ,kindly contact : annie@komegtech.com whats app ,wechat :+86-
13726402801,QQ:471558353
Contact Person: Peter Zhang
Tel: +8615818392160