Aging Resistant Salt Spray Test Chamber , Salt Fog Cyclic Corrosion Test Chamber

Feature

 

 

1, Shell of the salt spray test machine is made of 316 Stainless steel;, which are acid, salt high temperature, and aging resistant .

 

2, Suitable for salt spray copper acetate and other testing methods.

 

3, Specified nozzle and tapered diffusion device make mist falling evenly and quickly.

 

4, Manual or automatic control mode, max, testing time can reach up to 999Hrs.

 

5, After the completion of the test, can automatically demist. Users can clearly observe the test process through the transparent cover.

 

6, Three sets of temperature control systems for air saturated barrel, inner chamber temperature and test solution temperature ensure the test accuracy and standard.

 

 

 

Specifications:

 

Specifications (Note: We reserve the right to change specifications without prior notice)
Model	HL-160-NS	HL-120-BS	HL-90-BS	HL-60-SS
Interior dimensions(W*H*D)mm	1600 X 500 X 1000	1200 X 500 X 800	900 X 500 X 600	600 X 400 X 450
Exterior dimensions(W*H*D)mm	2240 X 1500 X 1600	1410 X 1280 X 880	1460 X 1280 X 910	1130 X 1070 X 630
Testspace Volume(L)	800	480	270	108
Salt Water Tank Volume (L)	60	40	25	15
Heater	15KW+1KW	11KW+1KW	7KW+0.75KW	3KW+0.75KW
Air compressor	2HP	2HP	1/2HP	1/2HP
Temp. range (Testing barrel)	35±1℃～50±1℃
Temp. range (Pressure barrel)	47±1℃～63±1℃
Test applicable	NSS, ACSS,CASS,CORK
Pressed Air Pressure	1.00±0.01kgf/cm²
Spray Amount	1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)
Ambient Relative Humidity	More than 85%R.H.
PH Value	6.5~7.2 3.0~3.2
Spraying Manner	Programmable Spraying
Power	AC220V 1Φ 50Hz

 

Structure(figure1)

 

 

Instruction:

 

(1) Spray tower

 

(2) Funnel cup

 

(3) Touch screen controller

 

(4) Regulator

 

(5) Pressure gauge

 

(6) Metering cylinder

 

 

Controller(figure 2)

 

 

Controller instruction:

 

(1)Chamber real-time temperature

 

(2)Chamber temperature setting

 

(3)Actual test time

 

(4)Test time setting

 

(5)Accumulative time

 

(6)Power swithch

 

(7)Machine start/stop working button

 

(8)Spray start/pause button

 

(9)Test chamber low water alarm

 

(10)Defog after test

 

(11)Salt water tank low water alarm

 

(12)Reduce setting value

 

(13)Increase setting value

 

(14)Pressure barrel low water alarm

 

(15)Non-spray time setting

 

(16)Spray time setting

 

(17)Pressure barrel temperature setting

 

(18)Pressure barrel real-time temperature

 

 

 

Control system:

 

Test chamber temperature control: Control the chamber temperature , according to standard, NSS AASS test is 35℃,and CASS test is 50℃.

 

Pressure barrel temperature control:Control the saturated air barrel temperature, NSS AASS is 47℃,CASS test is 63℃.

 

NSS AASS Test:Chamber temperature set 35℃, Pressure barrel temperature set in 47℃(40℃-50℃).

 

CASS test :Chamber tember temperature set 50℃, Pressure barrel temperature set 63℃(60℃-70℃).

 

Power switch:Control the whole machine power. Long press for power on or off.

 

Start/stop switch:Control the heating system of test chamber, heat sink and Pressure barrel.

Spray/pause switch:control the spray system.

 

Defog switch:control defog system, clear the salt mist in chamber after test.

 

Test chamber low water alarm:When the water level is low, the light will flicker . Add pure water into the test chamber until the light doesn^,t flicker.

 

Salt water tank low water alarm:When the salt water level is low, the light will flicker.Add salt water into the salt water tank until the light doesn^,t flicker.

 

Pressure barrel low water alarm:When the water level is low, the light will flicker.Add pure water into the pressure barrel nutil the light doesn^,t flicker.

 

 

Illustration on the back of the salt spray tester

 

 

 

 

Our Services