Product Details:
Payment & Shipping Terms:
|
Temp Range: | -40℃ ~ +150℃ | Capacity: | 2000L |
---|---|---|---|
Interior Material: | SUS 304 | System: | Balanced And Humidity Control System |
Safety Devices: | No Fuse Breaker,over Pressure | Packing: | Rigid Foam And Wooden Box |
High Light: | temperature and humidity chamber,temperature test chamber |
Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability
test in industrial products.
Technical Specification
Different size and temperature range ,humidity range can be according to your requirements .
Model | KMH- | |||||||||
36 | 64 | 80 | 100 | 150 | 225 | 408 | 800 | 1000 | 1300 | |
Working Chamber Volume (litter | 36L | 64L | 80L | 100L | 150L | 225L | 408L | 800L | 1000L | 1300L |
Interior size (WXH XD cm) | 30 | 40 | 50 | 40 | 60 | 70 | 70 | 100 | 100 | 100 |
40 | 40 | 50 | 50 | 40 | 70 | 75 | 100 | 100 | 100 | |
30 | 40 | 40 | 50 | 46 | 48 | 80 | 80 | 100 | 130 | |
Temperature range | ,R: -20ºC~ +150 ℃ L :-40ºC~ +150 ℃ S: -70ºC~ +150 ℃ (can be make as your requirements) |
Temp Deviation |
≦ ± 2.0℃
|
Temp Fluctuation | ±0.5℃ |
Heat up rate |
Heating up rate:from -20℃ ↑ +80℃ Nonlinear 2℃min no load
|
Humidity range |
10%R.H~98%R.H
|
Cooling rate |
Cooling rate:from +80℃ down to -20℃ Nonlinear 3℃min no load
|
Chamber size |
Interior size: W 1280 × H 1000× D 1000 mm
|
Load |
Product calorific value 1000w
|
Insulation box |
Wall material: high-quality carbon steel
nner wall material: SUS304 # matte stainless steel plate
Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
Door |
Single door, left open. Heating wire was installed at the door frames to prevent
condensation at low temperatures. |
Water outlet hole |
Available for drain the condensate water
|
Lighting device |
LED Lighting device *1 located on observation window
|
Heater |
High quality nickel-chromium alloy wire electric heaters,
Non-contact control mode(SSR) |
Condensate drain hole |
With workroom condensate and condensate drain. |
Cable port |
Φ50mm*1 located on each side of chamber, with rubber stopper and stainless steel cover
|
Shelf for samples |
stainless steel sample holder 8pcs,Adjustable, load capacity 30kg/ layer
|
Feathers
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Contact Person: Anna Hu
Tel: +8618098282716