|
Product Details:
Payment & Shipping Terms:
|
| Temperature Range: | -70℃ ～ +180℃ | Temperature Deviation: | ≦±2.0℃ |
|---|---|---|---|
| Temperature Fluctuation: | ±0.5 ℃ | Workspace Volume: | W 1000 × H 1000 × D 1000 Mm |
| Exterior Size: | W 1550 × H 2080 × D 2500 Mm (appr.) | Wall Material: | High-quality Carbon Steel With Static Color Spray |
| Inner Wall Material: | SUS304 # Matte Stainless Steel Plate | Insulation Materials: | Rigid Polyurethane Foam Insulation Layer + Glass Fiber. |
| Heating Rate: | -70℃ To +180℃ Within 90 Min No Load | Cooling Rate: | +20℃ To - 70℃ Within 90 Min No Load |
| High Light: | environmental test equipment,environmental testing chamber |
||
High Precision Environmental Test Chamber For Combined Vibration And Temperature And Humidity
Applications
This equipment complied with national standard, able to satisfy special testing requirements, is widely applied for electronic and electric products, automotive parts, components, and materials by high low constant temperature, temperature change, shock, damp heat vibration, etc combined environment simulation reliability test.
Vibration table configuration
Air-cooling series electrical vibration system
Water-cooling series electrical cooling system
Digital random vibration controller
Digital sine vibration controller
Moving method
High low temperature (damp heat ) test chamber with slide rail
Match with vibration table via moving high low temperature (damp teat) test chamber on slide rail
Vibration table with slide rail
Match with high low temperature (damp teat) test chamber via vibration table moving on the slide rail.
Connection Method
Adopt connecting shaft connection method ( match with vertical vibration)
Vibration table gets into the chamber via a connecting shaft, match with the test chamber to reach combined testing effects.
Vertical, horizontal combined vibration, can customize design
|
Ⅰ. Performance (Water-cooled, Ambient temperature +20℃, no load ) |
|
| 1. Temperature range | -70℃ ～ +180℃ |
| 2.Temperature deviation | ≦±2.0℃ |
| 3.Temperature fluctuation | ±0.5℃ |
| 4.Temperature change rate |
Heating rate: -70℃ to +180℃ within 90 min no load Cooling rate: +20℃ to - 70℃ within 90 min no load |
| 5.Humidity range | 20%R.H.～98%R.H |
| 6. Humidity deviation | ±2％RH |
| 7. Humidity uniformity | 3.0％RH |
| 8.Humidity deviation | ±2.0％RH |
| Electric Control System | |
| Control panel |
a. Emergency stop switch b. Power switch c. Over-temperature protection device d. RS-485 or RS-232 Interface |
| Safety protection device | A. Sample over-temperature protection B. Empty burn prevent protection switch C. Motor overload protection D. Compressor high-pressure protection switch E. Compressor over-temperature protection switch. Compressor overcurrent protection switch F.Compressor overcurrent protection switch G. Overvoltage reverse phase protection switch H. No fuse switch I. Breaker |
| Alarm indication | When the above protection, the device stops running, and sound and light alarm, At the same time in the controller display fault location and its causes and solutions. |
| Installation environment | |
| Power Supply | AC 3 ψ4W 380V 50Hz (R.S.T.N ground wire)( voltage fluctuation≦±10%) |
| Surrounding environment |
Ensure operating environmental temperature range: 5〜 35℃ |
| Ground protection | ground resistance ≦4Ω |
| P.S. | 1. Please equip the above power demanded to the terminal box of the machine control; the user must prepare an exclusively no-fuse switch for the machine. 2. Please confirm whether it can enter the door or access elevators. |
| 3. This offer is for the price of the machine only and does not include the cost of the power cord, water tower, and piping costs |
|
System technical specification
|
|
| Exciting force |
Sin: 19600N (2000kg.f) Random: 19600N (2000kg.f |
|
Frequency Range
|
Vertical table: 2Hz~3000Hz |
|
Rated acceleration
|
980m/s2100g (no load) |
|
Rated speed
|
2m/s |
|
Rated displacement
|
51mm(p-p) |
|
Maximum load
|
300kg |
|
Equivalent mass of moving parts |
Vertical table: 20kg |
|
Power
|
AC 3ψ4W 380V±10% |
|
Main technical specification
|
|
|
Output Power
|
20kVA |
|
output voltage
|
100V |
|
Input resistance
|
≥15kΩ |
|
Signal to noise ratio
|
≥60dB |
|
Harmonic distortion (Resistance load) |
＜1.0% |
|
Output voltage measurement error |
≤5% |
|
Output current
|
To 150A step increase, up to 6000A |
|
Cooling method
|
Forced air cooling |
|
Input signal voltage
|
≤1.5Rms |
|
Output current crest factor |
≥3 |
| DC stability |
The zero drift of the output terminal is not greater than 30mv/8h |
|
Frequency range
|
5-3500Hz:±3dB mid-frequency gain:≥80 |
|
DC/AC conversion efficiency |
＞90% |
|
Load property
|
Resistive, capacitive, sensible arbitrary |
|
Parallel machine current imbalance |
≤2.8% |
|
Average trouble-free working hours |
＞3500 hours |
|
Power
|
AC 3 phase 50Hz |
Features
1.With high precision perfect external design, external with double sides cold-rolled plate electrostatic powder-coated materials, internal with SUS #304 high temperature resistant stainless steel.
2. Insulation material adopts fire resistant high strength PU polyurethane foaming thermal insulating material.
3. More than 20% of energy saving is achieved & thanks to the introduction of Japan & German advanced refrigerator control technology.
4. The Control system and control circuit components are introduced with the famous brand.
Contact Person: Ms. KOMEG
Tel: +86-13143135835
Fax: 86-769-83396675
