Intelligent Auto Salt Spray Corrosion Test Chamber For Electronic / Chemical Industrial

Corrosion test chamber is specifically designed for materials surface corrosion resistance testing, these

materials are treated in kinds of paint, coating, plating, antirust oil treated, etc.; widely used in metal,

electro, electronic, chemical, automotive, aviation, aerospace, telecommunications and other industries

. Carrying out corrosion testing for the products of materials and coating, in order to analyze and

evaluate the samples’ performance under specific environmental conditions of marine environment.

II,Product Specification

220V/50HZ

2.5KW

50KG

W 600 × D 450 × H 400 mm

III,Main Technical Parameter

1-2ml/80cm²/h

cycle, continuous program

exhaust mist by air extrusion

meets the standards rules

1,Work environment

A-level 5mm PVC enhanced rigid plastic plate, the surface smooth, and anti-aging

, corrosion-resistant;

8mm A-level PEEK corrosion-resistant plate .

The cover is made of 8mm A-level PEEK corrosion-resistant plate resistant sheet,

which is easy to observe when the test sample is tested. The cover and the box are

sealed with water, so as to prevent leakage.

inner sink heating mode, heating up fast, uniform temperature distribution.

observation reagent replenishment slot and the consumption of salt water at any

time

Well-designed water storage system for water to ensure the smooth and reliable

operation.

Pressure tank made of SUS316 # stainless steel, the appearance of the electrolytic

treatment, excellent corrosion resistance.

The controller uses "TEMI510" touch screen control using imported high-precision

microcomputer man-machine dialogue 5.0 inch LCD smart touch screen controller,

temperature, time, alarm, defogger, spray, and other functions of integrated control

, with dynamic display, beautiful and clear screen, Beautiful, humane design with

platinum material temperature sensor, the overall temperature error of ± 1 ℃

3,Touch Screen Features

The machine control system uses 5.0 inch LCD touch screen control, beautiful and

clear picture display.

All digital circuit design, temperature control for the PID automatic calculation, the

temperature is accurate to 0.1 ℃, can be continuous touch 20 million times, The

test function is complete, can achieve continuous, interval, programmable and other

spray options.

Work interface dynamic display, the use of man-machine dialogue interface, and a

buzzer alarm prompts working conditions.

ergonomic design, beautiful appearance, easy to operate.

Whether the laboratory or the pressure tank short of water, will automatically add

the corresponding location of the water level, to ensure continuous, reliable and

safe working.

When the replenishment of laboratory water level is completed, it will start the delay

replenishment function, automatic water valve will add more 6 to 10 seconds of

water in the laboratory, to prevent frequent consumption of water due to start

electronic valve, a great extension of service life of the electronic valve.

Intelligent over-temperature protection system, when the test chamber or pressure

tank exceeds 5 ℃ of the set temperature, the touch screen will dynamically prompt

, and will automatically cut off the circuit, the heating tube no longer powered.

With the power-off time memory function, if the instrument suddenly power off or

half-way directly off, the next time the machine restarts, will retain the last test data

and set data, will not cause a waste of test time, for the operator saving a lot of time

and effort.

With double over-temperature protection, the touch screen over-temperature

protection, based on the equipment we also installed an EGO (over-temperature

protection device) to ensure that even in the worst case, the machine is still safe

and stable.

Using titanium heating tube, the corrosion resistance performance is 8 to 10 times

more than the stainless steel heating pipe, the steam directly into the laboratory,

heating speed faster, shorter standby time.

Cone-shaped dispersion, with functions of guiding fog, adjust the fog and even fall

fog and so on

Compared with the ordinary Corrosion Test Chamber , all the function keys of the

touch screen are integrated on the screen, and the operation is simpler. The

integrated circuit and modular structure are adopted for all the lines, which greatly

reduces the incidence of failure.

When the time is set, the temperature and water level reaches the set requirements,

will automatically start the spray, no manual duty.

Operation interface with a lock screen function, to achieve a person to manage and

operate the model. Prevent other operators from revising or changing the

parameters of the test.

Brand new third-generation English touch screen waterproof, anti-corrosion effect is

even better.

use high-speed heating titanium heater.

Tower spray system, high-grade quartz glass for a long time without crystallization,

fog particles are distributed.

Comply with national standards for the area of 80CM ² funnel and the standard

cylinder.

NSS

35℃±1℃

47℃±1℃

CASS

50℃±1℃

63℃±1℃

Air pressure of 1Kg/cm², in two stages adjustment. Stage A adjustment of 2Kg/cm2,

use inlet air filters, with drainage function; Stage B is accurate adjustment of 1Kg/cm², 1/4

pressure gauge, display precise and accurate.

1. “Bonute principle”, draw salt water and atomize it, atomization even, no block crystal phenomenon, ensures continuous test.

2. Nozzles are made of tempered glass, you can adjust the amount of spray and spray angle, precise crystals glass nozzle(PYREX), ensure no crystalline block of concern in 4000 hours. 　

3. Spray volume: 1~2ml/h adjustable (ml/80cm²/h standard test 16-hour average value).

Measuring tube using in-line installation, neat appearance, convenient operation and observation, reduce Installation space.