Product Details:
Payment & Shipping Terms:
|
Controller: | Touch Screen | Compressor: | Tecumseh, Bock Compressor |
---|---|---|---|
Warranty: | 12 Months On Parts (excluding The Damages Caused By The Natural Disasters, Abnormal Power, Improper Operation And Maintenance, Etc) | Cooling Mode: | Air Cooled |
Temp Rate Of Change( ℃/Min): | 10 | Working Chamber Volume(L): | 225L |
Power: | AC 380V/50Hz 3phase 5 Wires+ Ground Wire | Material: | Stainless Steel |
High Light: | environmental testing chambers,Thermal Shock Test Chamber |
225L TEMI 880 Controller Constant Accelerated Thermal Cycle Chamber / Environmental Test Chamber
Environmental Test Chambers Suitable for electric, electronic, mechanical, and other products, spare parts and materials for high and low temperature test, damp heat test, simulation under the condition of temperature and humidity changes to products, parts and materials for quality and reliability test.
Specifications | |||||||
Model | ESS-SL | ||||||
225SL5 | 225SL10 | 408SL5 | 408SL10 | 1000SL5 | 1000SL10 | 1000SL15 | |
Working Chamber Volume(L) | 225 | 408 | 1000 | ||||
Temp Rate of Change( ℃/Min) | 5 | 10 | 5 | 10 | 5 | 10 | 15 |
Performance | -70℃~+100℃ | ||||||
Rapid Temp Change -55℃~+85℃ Full Linear Control | |||||||
Humidity Constancy | ±0.5℃ | ||||||
Temp Constancy | ±3.0℃ | ||||||
Exterior Material | Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel | ||||||
Interior Material | Stainless Steel Plate(SUS 304) | ||||||
Insulation Material | Rigid Polyurethane Foam | ||||||
Safety Devices | over pressure,over heat and over current protection for compressor, over temp. protection, | ||||||
Compressor | Semi-Hermetic Compressor | ||||||
Cooling Mode | Water Cooled | ||||||
Control system | Balanced Temperature & Humidity Control System(BTC type) | ||||||
Heater | Iron-chrome wire heater | ||||||
Blower | Centrifugal Blower | ||||||
Observation Window | Glass incorporating heat generator | ||||||
Temp Sensor | Pt-100 | ||||||
Controller | Touch screen programmable controller | ||||||
Ambient Temp. | +5℃~+35℃ | ||||||
Power | AC 380V/50Hz 3phase 5 wires+ Ground wire | ||||||
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
Features
High performance and quiet operation (65 dBa)
Space-saving, Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug
Three levels of overheat protection
Easy lift-off service panels, electrical access on left
Direct water supply connection for continuous operation (supply tank optional)
uniform, saving valuable time for users.
Standards Implemented and Met
GB10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode
Industrial Application
Automotive
Board Level
Chassis Level
Computer Technology
Consumer Products
Full System Level Testing
Networking
Packaging Applications
Pharmaceutical
Power Supply
Servers
Sub-Assembly Components
Sub-Assembly Modules
Advantages:
Rational Construction and fast cooling rate
Frequency conversion control of wind speed.
Adopts international brand of imported parts for cooling system to improve operation reliability
Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.
Standrad Accessories:
Sight window *1 (Adiabatic glass window)
cable port(diameter 50mm)*2,
Samples shelves *2 sets
Chamber lamp *1
Power cable: 2 meters long
Packing Details:
We use PP Film wrapping the test chamber to protect the test chamber from moisture or being scratched first, then use strong plywood case for easyload and transport, and to keep the chambers from potential crash or impact.
After-sale Service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Why Choose KOMEG?
Over 26 Years' Experience
Komeg has been the brand of Komeg Technology Industrial since 1990. We manufacture environmental simulation test equipment for quality-conscious customers. Our factory is located in Dongguan, covering an area of 5,000 square meters, with over 52 employees including 26 R&D engineers.
We also have offices in Shenzhen and Songshan Lake National Hi-Tech Industrial Development Zone. Our product range includes programmable temperature and humidity chambers, thermal shock test chambers, walk-in chambers, burn-in room and aging test chambers, drying ovens, salt spray testers, as well as custom-made products for laboratories, research institutions, electronic communications and military enterprises.
KOMEG is a Chinese pioneer since 1990 for its design and manufacture of a comprehensive range of environmental test chambers, from the compact bench-top to walk in size.
KOMEG specialized in environmental test chambers, ESS chambers, thermal shock chamber and other environmental simulation equipment.
Founding Date: 1990, Feb 28, specialize in environmental test chamber field
OBM and distributor: 1991, Feb 11, mainly in Hong Kong and Guangdong Market
Plant set up: 2000, July 07—Changping County, Dongguan City, China
Leading Supplier: 2001, annual turnover 20,000,000RMB, Leading Supplier
NSFC Gov founding: 2003, Win Gov founding (National Science Foundation of China)
Famous Brand: 2007, KOMEG become famous brand of Guangdong Province
R&D Center Launch: 2009, Songshan Lake National Hi-Tech Development Zone
ISO 9001:2008: 2012, April, ISO 9001:2008 Certified
CE &GMC Certificate: 2013, further expansion in overseas business & market
TUV & Approved: Audits reports available
New Plant Location: 2014, Oct, Songshan Lake National Hi-Tech Development Zone
More Surprise: To be continued……
Contact Person: Peter Zhang
Tel: +8615818392160