Product Details:
Payment & Shipping Terms:
|
Product Name: | Walk-in Chamber | Volume(M3): | 27.1CBM |
---|---|---|---|
Temp. Constancy: | +/-0.5oc | Humidity Constancy: | +/-2.5%R.H |
Controller: | LCD Touch Panel | Delivery: | 40 Working Days |
Interior Dimensions: | W3000 X H2100 X D4300mm | Material: | Stainless Steel Plate |
High Light: | walk in environmental chamber,walk in humidity chamber |
LCD Touch Panel Controller Environmental Walk-In Chamber For Reliable Testing
1. Overview
Environmental Chambers are environmental testing devices used for various types of testing such as prototype evaluation, research & development testing, production testing, accelerated stress testing, reliability testing, failure analysis, and any other application where environmental simulation is needed.
2. Standard Implemented and Met:
Inspect standard: JJF-1101, GB/T 10592,GB/T 10586
Testing standards:
YD/T 2061, HB 7122.3, 6783.7, GJB 5382.7, GJB 150, GB/T 2423,5170.2,5170.5,5179.2, ASTM E512, NF EN 60068-2-38, CNS 12565,12566, KS C0227, KS C022
3. Main Technical Parameters
SPECIFICATIONS | |||||||
Model | KMHW- | ||||||
4 | 6 | 8 | 13 | 17 | 21 | ||
Volume(m³) | 9 | 12.9 | 16.8 | 16.8 | 35.2 | 43.3 | |
Interior Dimensions | W(mm) | 2100 | 3000 | 3900 | 3000 | 3900 | 4800 |
H(mm) | 2100 | 2100 | 2100 | 2100 | 2100 | 2100 | |
D(mm) | 2050 | 2050 | 2050 | 4300 | 4300 | 4300 | |
Exterior Dimensions | W(mm) | 3250 | 4160 | 5050 | 5050 | 5050 | 5950 |
H(mm) | 2350 | 2350 | 2350 | 2350 | 2350 | 2350 | |
D(mm) | 2250 | 2250 | 2250 | 2250 | 4500 | 4500 | |
Control System | Balanced Temperature & Humidity Control System | ||||||
Temp. range | Maximum:80ºC,120ºC;Minimum:-60ºC,-50ºC,-40ºC,-30ºC,-20ºC,-10ºC,0ºC | ||||||
Humidity Range | 10%,20%,30%~95% | ||||||
Temp. constancy | ±0.5ºC | ||||||
Humidity constancy | ±2.5%R.H | ||||||
Temp. uniformity | ±2.0ºC | ||||||
Humidity uniformity | ±5.0%R.H | ||||||
Heat up time | +20ºC~+80ºC ,Within 60 min | ||||||
Pull down time | +20ºC~-55ºC -40ºC-20ºC-10ºC ,Within 120 or 90 or 60 min | ||||||
Interior material | Stainless Steel Plate(SUS 304) | ||||||
Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | ||||||
Insulation material | Rigid polyurethane foam | ||||||
Door size (mm) | Single wing:W800*H1800;Double wing:W1600*H1800; | ||||||
Safety Devices(standard) | No fuse breaker, over pressureover heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection |
||||||
Standard accessories | Sight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status indicator | ||||||
Refrigeration system | Water Cooled | ||||||
Semi-hermetic compressor, single stage or cascade refrigeration system | |||||||
CFC free refrigerant(HFC-507 and HFC-23) | |||||||
Controller | Panel | 7-inch LCD Touch panel,Chinese or English display selectable | |||||
Operation model | Program or fix point running | ||||||
Memory capacity | 120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles | ||||||
Accuracy | Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | ||||||
Input | Temp.:pt-100, Humidity:pt-100 or ~5V DCV | ||||||
Comm.port | RS-232 or RS-485 (Softawre is option) | ||||||
Ambient Temp. | +5ºC~+35ºC | ||||||
Wiring method | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires | ||||||
Note:1. We reserve the right to change specifications without prior notice | |||||||
2.Customized sizes and configurations available |
4. Description
Optional accessories
●Cable Port: Two size of cable port is available: Φ50mm, Φ100mm.
●Double door
●Pass room: Provided to avoid disturbance of atmospheric temperature
and humidity while opening the door.
●Floor reinforcement: Can be fixed if heavy specimen placed in the
chamber for test.
●Carry-in inclined platform: Provided below the door to facilitate moving
of specimens in and out through the door.
●Entire ceiling blow-out duct
The extremely wide air inlet reduces the airflow rate (down to
apprrox.0.5m/s)
●Dehumidifier
The rotation regenerating dehumidifier (M-300)ensures precise control of
low humidity (21℃,23%RH)for electrostatic reliability tests.
●Temperature and humidity recorder
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
●Status indication lamp
Provide to signal chamber status and warnings when normal running,
a malfunction running or stand by occurs.
●Water purifier
Provided to keep the humidifier heater free from scale and ensure the
supply of water to humidifier.
●Power socket
●Air cooled type condense
Standard Met and Implemented:
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method 6
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
Packing Details:
We use PP Film wrapping the test chamber to protect the test chamber from moisture or being scratched first, then use strong plywood case for easyload and transport, and to keep the chambers from potential crash or impact.
After-sale Service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Rapid Temp. Change Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt spray Chamber
Two wing Drop Tester
Vibration Testing Machine( mechanical and electromagnetic)
Contact Person: Anna Hu
Tel: +8618098282716